Easy donning of dry gloves with a latex seal (English)

Everybody who ever tried those pesky dry gloves with a latex seal knows what a struggle it can be to put them on.
However, there is a little trick that makes this quite easy.
You should not try to fight your hand into the narrow seal opening, but instead you can point the seal into the glove so it’s facing the same direction as your dry suit’s wrist seals when you put your suit on.




Now it’s very easy to just point your hand and slide it into the glove…
A little talcum powder on the seal helps this a lot, but it’s very nice to have your seals in good condition so they don’t “stick”. I don’t use talcum powder or anything at all.
Your hand should ideally just slide through.




Once your hand is in the glove, you should pull the side of the seal/glove to pull the glove seal’s edge up onto the dry suit wrist seal.








Make sure you check the entire circumference of your wrist to see if the glove seal is over the dry suit wrist seal, there should be no skin, liner or under glove showing or it will leak.
This part can be tricky at first, but just needs some practise.
Don’t worry that the seal is facing the “wrong” way; if you did it right it won’t leak a drop.








12:18 Gepost door Davy in diving tips & tricks | Permalink | Commentaren (0) | Tags: dry suit, dry gloves |  Facebook |

De commentaren zijn gesloten.